VL817

USB 3.1集线器HUB芯片,提供2端口和4端口配置,USB充电支持。支持SuperSpeed (5Gbps)、High Speed (480Mbps)、Full Speed (12Mbps)和Low Speed (1.5Mbps)设备的任何组合,在提供高功率效率的同时降低了BOM成本

USB3.0/3.1 Hub Controllers芯片

VL813 推荐

VL822 推荐

VL820 推荐

VL812

VL817 推荐

VL211

VL815

USB PD协议芯片(DFP/UFP/DRP)

VL100 推荐

VL103

VL105

VL106 推荐

VL107 推荐

E-Marker芯片

VL150

VL152

USB Data Switch芯片

VL162

VL160 推荐

VL163 推荐

VL170 推荐

VL171 推荐

USB 3.1 SATA Controllers芯片

VL716

VL717

VL713

VL715

Host Controller芯片

VL805/VL806

VL817 (4-Port/ 2-Port) 

USB 3.2 Gen1, 5Gbps

Integrated BB + HID 

Smart Charging 2 Smart Management Low Power

Integrated DC-DC

QFN76 9x9mm (4-port) QFN56 7x7mm (2-port)

VL817是一个现代USB 3.1第一代集线器控制器,具有优化的成本结构和完全符合USB 3.1第一代规范,包括ecn和合规测试更新至2017年1月。VL817提供2端口和4端口配置,并具有集成稳压器,新的低功耗设计,和全面的USB充电支持。VL817支持SuperSpeed (5Gbps)、High Speed (480Mbps)、Full Speed (12Mbps)和Low Speed (1.5Mbps)设备的任何组合,集成的USB 2.0集线器的多事务翻译器功能提供了更高的性能,当多个Full Speed设备同时使用时。集成的5V DC-DC开关稳压器使VL817可以直接从5V USB VBus供电,在提供高功率效率的同时降低了BOM成本。


VL817具有灵活的固件架构,提供了自定义功能框架,以及字段更新。各种参数,包括Tx均衡设置和GPIO行为可以通过固件进行更改,包括可选配置的USB充电控制器,用于充电各种设备,如智能手机和平板电脑。


基于vl817的集线器设备可以在Windows、Mac OS X和各种Linux内核下工作,无需额外的驱动程序。基于vl817的集线器设备还兼容支持USB集线器功能的非x86设备和平台,如智能手机、平板电脑和机顶盒。它非常适合所有USB集线器应用程序,如独立的USB集线器,笔记本/超极本坞站/端口复制器,桌面PC前面板,主板集线器,和USB集线器复合设备。VL817集成了多个可选的USB 2.0虚拟设备,包括USB公告牌,USB HID,以支持媒体控制按钮,如播放/暂停,音量上/下等。

关键特性

USB 3.1兼容的

—符合通用串行总线3.1规范

-满足所有USB 3.1 ECN到2017年1月

-兼容通用串行总线2.0规范USB 2.0集线器支持MTT

—支持超高速、高速、全速和低速设备的任意组合同时运行

-内部USB PHY采用先进的CMOS工艺,低功耗集成USB设备

- USB HID类设备(可选)

作为USB 2.0虚拟设备实现,方便FW更新或媒体控制按钮

可配置行为-始终存在/禁用

- USB公告牌1.1类设备(可选)

实现为USB 2.0虚拟设备

可配置的行为-暴露时,必要/总是呈现/禁用全边带信号支持

—支持所有端口的“独立”和“集群”操作

-支持PWM LED状态灯

- SPI固件接口。固件升级可通过USB。

—特殊应用管理接口

- DFPs的任何组合可以配置为支持USB电池充电综合USB电池充电支持

-支持USB电池充电规格v1.2 (SDP, CDP, DCP)

-支持供应商特定的收费模式。苹果2.4A,三星等。

-支持YD/T 1591-2009

—当系统处于挂起、关机或断开状态时,支持单机充电

- DFPs的任何组合可以配置为支持USB电池充电电源和包

—需要3.3V和1.1V输入

- 25兆赫晶体

-集成电压调节器从5V输入产生所有需要的电压

5V至1.1V切换DC-DC稳压器

5V至3.3V LDO调节

QFN 76L绿色包装(9x9x0.85 mm)

QFN 56L绿色包装(7x7x0.85 mm)


Key Features

  • USB 3.1 Compliant
    - Compliant to Universal Serial Bus 3.1 Specification
    - Meets all USB 3.1 ECN through Jan 2017
    - Compliant to Universal Serial Bus 2.0 Specification USB 2.0 Hub Supports MTT
    - Supports Simultaneous Operation of Any Combination of SuperSpeed, High-Speed, Full-Speed, and Low-Speed Devices
    - In-house USB PHY employs advanced CMOS process for low power consumption

  • Integrated USB Devices
    - USB HID Class Device (Optional)
    Implemented as a USB 2.0 Virtual Device, Facilitates FW Update or Media Control Buttons
    Configurable Behavior – Always Present / Disabled
    - USB Billboard Class 1.1 Device (Optional)
    Implemented as a USB 2.0 Virtual Device
    Configurable Behavior – Expose When Necessary / Always Present / Disabled

  • Full Sideband Signal Support
    - Supports both Individual and Ganged Mode Operation for All Ports
    - Supports PWM LED Status Lights
    - SPI Interface for Firmware. Firmware Upgradable over USB.
    - Management Interface for Specialized Applications
    - Any Combination of DFPs can be Configured to Support USB Battery Charging

  • Comprehensive USB Battery Charging Support
    - Supports USB Battery Charging Specification v1.2 (SDP, CDP, DCP)
    - Support for Vendor Specific Charging Modes eg. Apple 2.4A, Samsung, etc.
    - Supports YD/T 1591-2009
    - Supports Stand-Alone Charging when System is Suspend, Shut Down, or Disconnected
    - Any Combination of DFPs can be Configured to Support USB Battery Charging

  • Power and Package
    - Requires 3.3V and 1.1V Inputs
    - 25MHz Xtal
    - Integrated Voltage Regulators Generate All Required Voltages from 5V Input
    5V to 1.1V Switching DC-DC Regulator
    5V to 3.3V LDO Regulato
    - QFN 76L green package (9x9x0.85 mm)
    - QFN 56L green package (7x7x0.85 mm)


VL817 USB 3.2 Gen1 Hub Key Features & Improvements: 

Product Consolidation: Combines VL811+ & VL812/ VL813 into a Single Chip!

4-Port Individual Mode for USB Battery Charging Support on All Ports 

Integrated 5V to 1.2V Switching Regulator, 5V to 3.3V Linear Regulator

Firmware Update over USB

Optimized Design for Improved Functionality, Small size, and Performance 

Integrated (Optional) USB Billboard Device for USB PD Accessory Support 

Modernized Hub Core meets USB 3.2 ECNs and Compliance Testing Updates to date

Improved Integrated Regulator Protection and Operational Efficiency 

Industry-Leading Low-Power Consumption during USB Suspend 

Features Management Interface for USB/Charging Port Enable/Disable, Billboard, etc. Earned USB 3.2 Gen1 USB-IF certification TID# 330000071 Packages: QFN76 9x9mm: Standard Configuration; Replaces VL811+/ VL812/ VL813

QFN56 7x7mm: 2-Port Configuration; Replaces VL811-Q4S